ibiotec non staining grease - NEOLUBE® AL 150 - Ibiotec

český Deutsch English Español Francais Italiano Português slovenský

Codex grease, food grade grease, non staining grease, non staining grease spray, translucent grease

Home Datasheet Contact Visit our company

Last update: 2024/03/11 13:16

ADHESIVE CODEX LUBRICATING

GREASE NSF H1-CERTIFIED FOR AGRO-FOOD INDUSTRIES (IAA)

CODEX QUALITY FOR PHARMACEUTICAL INDUSTRIES

TRANSLUCENT, ODOURLESS, FLAVOURLESS

NO ORGANOLEPTIC EFFECTS

EXCELLENT RESISTANCE TO WATER AND STEAM

DESCRIPTION
An inorganic anti-corrosion gel additive. Viscous grease with excellent adhesive properties, suitable for use on low-speed mechanical components.

Compatible with all metals, thermosetting resins, thermosetting polymers, composites and elastomers.

AREAS OF USE
Plain bearings, hinges.
Power transmissions, roller chains, long-pitch chains, API-type chains, hollow rivet chains, leaf chains, slat band chains, fixed ratio transmissions, gearing.
Conventional geared transmissions, straight gearing, cylindrical gears, worm gears.
Information transmission, cams, tappets.
Guide systems, columns, slide rails.
Pumps, valves, block or gate valves.
Percolators, water heaters, meters, time stamp equipment, measuring equipment, marine equipment, radio navigation equipment, agitators, mixers, mills, presses, centrifuges, sterilisers, packaging machines, agricultural equipment, packers, closing/capping machines, shrink wrappers, press tools.
Any clean lubrication without risk of pollution.
Joint assembly.
Canning plants, bakeries, the manufacture of pastries, biscuits and confectionery,

Delicatessens, dairies, abattoirs, cattle feed,

Industrial ice cream-makers, breweries, mineral water manufacturing facilities,

Grape cultivation and wine-making operations,

Fruit and vegetable shipping companies.

Download the data sheet

TYPICAL PHYSICO-CHEMICAL CHARACTERISTICS

PHYSICAL CHARACTERISTICS OF THE GREASE
PROPERTIES	STANDARD OR METHOD	VALUE	UNIT
Appearance	visual	smooth, viscous	nm
Colour	visual	colourless	nm
Apparent density at 25°C (pycnometer)	NF T 30 020	897	kg/m³
NLGI Class	NLGI National Lubricating Grease Institute	2	Classification
Thickener	-	Organic	-
Solid lubricant content	-	Without	%
Penetrability at 25°C Non-worked Worked, 60 strokes Worked, 1,000 strokes Worked, 10,000 strokes Worked, 100,000 strokes	NF ISO 2137 / ASTM 2176	265-295 265-295 265-295 285-315 290-320	1/10° mm 1/10° mm 1/10° mm 1/10° mm 1/10° mm
Dropping point Dropping point if greater than 360°C	NF ISO 2176 / ASTM D 566 ASTM D 2265	Without Infusible	°C
Impurities > 25 µm > 75 µm > 125 µm	FMTS 791 3005	0 0 0	nb/ml
PHYSICO-CHEMICAL CHARACTERISTICS OF THE BASE OIL
PROPERTIES	STANDARD OR METHOD	VALUE	UNIT
Type of base oil	-	Mineral	-
Kinematic viscosity at 40°C Kinematic viscosity at 100°C	NF EN ISO 3104	90 70	mm²/s mm²/s
Acid value (AV)	NF ISO 6618	0.0	mg KOH/l
PERFORMANCE CHARACTERISTICS
PROPERTIES	STANDARD OR METHOD	VALUE	UNIT
Oil separation, 7 days at 40°C (bleeding)	NF T 60 191	0	% of mass
Oil separation 24 hours at 41 kPa (bleeding under pressure)	ASTM D 1742	4	% of mass
Sulphated ashes	NF T 60 144	0.1	% of mass
Copper strip corrosion	ASTM D 4048	1a	Rating
Hoffman oxidation	ASTM D 942	5	psi
Loss by evaporation 22 hours at 121°C	ASTM D 972	6	% of mass
Noack evaporation loss	NF T 60 101 CEC L-40 A-93 ASTM D5800	7	% of mass
Elastomer swelling 70h at 212°C	ASTM D 4289.83	2.5	Dimensional variation %
Temperature ranges Continuous Peak	- -	-20 +150 -20 +160	°C °C
Rotation factor	n.d_m	150,000	mm/min^-1
4-ball test Wear scar diameter Wear load index	ASTM D 2266 / ISO 20 623	0.80 1600	mm N
TIMKEN Test	ASTM D 2509	20	lbs
EMCOR rust prevention test Dynamic Static	NF T 60 135 ISO DP 6294/ ASTM D 1743	0-1 1	Rating Rating
Resistance to water washout at 80°C	ASTM 1264	8	% of mass

* not measured or non-measurable

INSTRUCTIONS FOR USE
Shake the aerosol can vertically for a few moments after the ball in the can becomes detached. Spray at a distance of 15 to 25 cm depending on the size of the mechanism to be lubricated.

PRESENTATIONS